UHMW Plastic Machining Part

UHMW Plastic Machining Part: 1. low friction coefficient 2. abrasion resistant 3. impact strength 4. easy machining

Anyang Ultrahigh Industrial Technical Co., Ltd produces professionally UHMW Plastic Machining Part. 

 

A. UHMW Plastic Machining Part description

 UHMWPE material has exceptionally low coefficient of friction offering superb sliding properties and is one of the best plastics for wear/abrasion resistance meanwhile tough and impact resistant even at cryogenic temperatures. As a result, it is definite that UHMW polyethylene is a wonderful engineering plastic that can solve many problems that other engineering plastics cannot.

 

B. Characteristics for UHMW Plastic Machining Part

1. UHMW exhibits virtually no water absorption

2, Non-Toxic

3. Low coefficient of friction

4. Corrosion resistant

5. Abrasion and impact resistant

6. Wear Resistant

7. Dielectric

8. Weatherproof  

 

C. UHMWPE Application Areas

1. Textile Industry:

2. Chemical Industry:

3. Food Processing Industry:

4. Paper Industry:

5. Material Handling:

6. Farm Implement:

7. Mining & Metals Processing Industries:

8. Transportation:

9. Consumer Products:

10. Waste Water Treatment:

 

D. A parameter table for UHMWPE 

Property	ASTM Test	Units Metric (US)	Typical Values
Specific Gravity	D792	gm/cm°	0.926-0.934
Tensile Strength @ Yield	D638	MPa (PSI)	21 (3100)
Tensile Strength @ Break	D638	MPa (PSI)	48 (7000)
Elongation @ Break	D638	%	350
Young's ("E") Modulus (23°C)	D638	MPa (PSI 105)	690 (1.0)
Young's ("E") Modulus (-269°C)	D638	MPa (PSI 105)	2970 (4.3)
Izod Impact Strength (23°C)	D256(1)	J/m (ft-LBS/in notch)	140 (30)
Izod Impact Strength (-40°C)	D256(1)	J/m (ft-LBS/in notch)	100 (21)
Hardness, Shore "D"	D2240	-	62-66
Abrasion Resistance	(2)	-	100
Water Absorption	D570	%	Nil
Relative Solution Viscosity	D4020	dl/gm	2.3-3.5
Density		(lbs./cubic in.)	.034

UHMW Plastic Machining Part